Receiver with Vented Bend - 106mm Manufacturer,Supplier and Exporter in India
Product Code : EL-CA-11592
The Receiver with Vented Bend 106mm is chemistry laboratory glassware used in distillation assemblies to guide condensed liquid into a receiving flask while allowing venting of the setup. It is suitable for schools, colleges, universities, chemistry laboratories, distillation practicals, laboratory suppliers, distributors, and educational procurement buyers.
Product Description
The Receiver with Vented Bend - 106mm from School Equipments India is intended for laboratory distillation setups where condensate must be directed from a condenser or adapter into a receiving vessel. The supplied product name confirms a vented receiver bend with 106 mm size; glass grade, joint sizes, bend angle, vent form, and dimensions must be confirmed before publication.
A receiver with vented bend is useful in teaching fractional distillation, simple distillation, solvent recovery demonstrations, and condensate collection. The bend helps direct liquid flow downward, while the vent helps avoid pressure build-up where the apparatus design requires atmospheric venting.
Key Features
- 106 mm size: confirmed product size for catalogue identification and procurement reference.
- Vented bend design: supports distillation assemblies where controlled venting is required.
- Receiver adapter function: helps guide condensate into a compatible receiving flask.
- Chemistry lab use: suitable for school and college distillation practicals under supervision.
- Capacity not applicable: this is a glassware adapter, not a liquid-storage vessel.
- Compatible setup use: works only when socket, cone, and receiving flask joint sizes match.
- Specification-dependent safety: material, joint fit, thermal suitability, and vent use must be verified.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
Receiver with Vented Bend - 106mm |
|
Primary Keyword |
Receiver with Vented Bend 106mm |
|
Secondary / Semantic Keywords |
receiver adapter with vent, distillation receiver bend, vented receiver adapter, laboratory glassware adapter, chemistry distillation glassware, glass receiver bend, school lab distillation adapter, condenser receiver adapter |
|
Brand |
School Equipments India |
|
Product Category |
Glassware, Plastics & Ceramics / Chemistry Laboratory Glassware / Distillation Apparatus |
|
Intended Users |
Schools, colleges, universities, chemistry teachers, laboratory suppliers, distributors, and educational procurement buyers |
|
Size |
106 mm |
|
Capacity |
Not applicable |
|
Design |
Receiver bend with vent |
What's Included in the Kit
- Receiver with Vented Bend 106mm
- Joint clips, tubing, receiving flask, condenser, adapter, packaging, instruction sheet, or certificate
Applications / Uses
- Guiding condensate into a receiving flask during distillation
- Supporting simple distillation and fractional distillation assemblies
- Providing venting where a closed distillation path is not required
- Using with compatible condensers, adapters, and receiving flasks
- School and college chemistry demonstrations on separation and purification
- Laboratory glassware procurement for educational institutions
How to Use the Receiver with Vented Bend - 106mm
- Confirm the socket size, cone size, bend angle, and compatible glassware before assembly.
- Inspect the receiver bend for chips, cracks, blocked venting, or damaged joints.
- Connect the upper joint to the condenser or distillation outlet as required.
- Connect the lower joint to a compatible receiving flask.
- Clamp the assembly securely so the glass joints are not under strain.
- Keep the vent open only when the experiment method requires atmospheric venting.
- Start heating gradually and observe condensate flow into the receiving vessel.
- Allow the apparatus to cool fully before dismantling and cleaning.
Safety note: Do not heat a sealed distillation system. Use goggles, gloves, lab coat, proper clamping, and suitable ventilation. Do not use cracked glassware, incompatible joints, flammable solvents near open flames, or unverified glassware under vacuum.
Care & Maintenance
- Rinse after use to prevent residue from drying inside the bend or vent.
- Clean with suitable laboratory detergent and avoid abrasive tools.
- Store in padded storage to protect the vent tube and ground joints.
- Remove from use if the vent is blocked, joints are chipped, or the glass body is cracked.
Why Choose School Equipments India
School Equipments India manufactures and exports scientific laboratory instruments, laboratory glassware, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. The brand supplies equipment for schools, colleges, universities, research laboratories, and educational procurement projects. Its product range supports chemistry, physics, biology, mathematics, general lab equipment, and school laboratory setup requirements. Buyers can request final specifications before ordering to ensure correct joint compatibility and safe laboratory use.
Frequently Asked Questions
What is a Receiver with Vented Bend 106mm used for?
A Receiver with Vented Bend 106mm is used in distillation assemblies to guide condensed liquid into a receiving flask while allowing venting.
What is the confirmed size of this receiver bend?
The confirmed size from the supplied product name is 106 mm.
What does the vent do?
The vent provides an opening for pressure relief or atmospheric access where the distillation method requires a non-closed receiver path.
What material is it made from?
The material is not confirmed. Add borosilicate glass or any specific glass grade only after supplier verification.
What joint sizes does it have?
The socket and cone sizes are not confirmed. Confirm joint sizes before matching the receiver bend with condensers, adapters, or receiving flasks.
Is it suitable for school chemistry labs?
Yes. It is suitable for supervised school and college chemistry practicals involving distillation and condensate collection.
For related laboratory products, explore laboratory labware, laboratory flasks, dropping funnels, and the School Equipments India product catalogue for institutional enquiries.
