'T' Pattern Connectors - 6-7mm Manufacturer,Supplier and Exporter in India
Product Code : EL-GPA-11627
The T-Pattern Connectors 6-7mm are laboratory tubing connectors used to join and branch compatible rubber or flexible tubing in a T-shaped flow arrangement. They are suitable for schools, colleges, chemistry labs, biology labs, gas preparation setups, laboratory suppliers, distributors, and educational procurement buyers.
Product Description
The 'T' Pattern Connectors - 6-7mm from School Equipments India are intended for laboratory tubing connections where one line must be divided or joined in a three-way T arrangement. A dedicated indexed 6-7mm listing was not verified, so the final size definition, product code, and pack quantity should be confirmed before publishing.
The closest verified School Equipments India listing for T-pattern connectors confirms polypropylene construction, rigid tapered arms with steps for firm grip, riffled ends for rubber tubing, good chemical resistance, and autoclavability at 121°C. The same confirmed product-family attributes should be reviewed against the final 6-7mm variant before procurement.
Key Features
- T-pattern connector design: supports three-way branching or joining of compatible tubing lines.
- 6-7mm size reference: supplied product size should be confirmed as tubing bore, outer diameter, or fit range.
- Polypropylene construction: verified for the closest School Equipments India T-pattern connector listing.
- Tapered stepped arms: product-family listing confirms rigid stepped arms for improved grip.
- Riffled tube ends: helps secure compatible rubber tubing during laboratory setup.
- Autoclavable at 121°C: verified for the related T-pattern connector listing; confirm for this exact variant.
- Capacity not applicable: this is a tubing accessory, not a measuring or liquid-holding vessel.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
'T' Pattern Connectors - 6-7mm |
|
Primary Keyword |
T-Pattern Connectors 6-7mm |
|
Secondary / Semantic Keywords |
T pattern tubing connectors, polypropylene tubing connectors, 6-7mm lab connector, rubber tubing T connector, chemistry tubing connector, laboratory gas tubing connector, school lab tubing accessories, three-way tubing connector |
|
Brand |
School Equipments India |
|
Product Category |
Lab Equipment / Labware / Tubing Connectors and Laboratory Accessories |
|
Intended Users |
Schools, colleges, universities, chemistry teachers, biology teachers, science laboratories, laboratory suppliers, distributors, and educational procurement buyers |
|
Capacity |
Not applicable |
|
Connector Size |
6-7mm |
|
Material |
Polypropylene |
|
Shape |
T pattern |
|
Arm Type |
Tapered arms with steps |
|
End Type |
Riffled end for rubber tubing |
|
Autoclavability |
121°C confirmed for related 4mm listing; confirm for 6-7mm variant |
|
Chemical Resistance |
Good chemical resistance confirmed for related 4mm listing; confirm chemical compatibility before use |
What's Included in the Kit
- 'T' Pattern Connector - 6-7mm
- Rubber tubing, clamps, stoppers, delivery tubes, instruction sheet, or certificate
Applications / Uses
- Branching flexible tubing in school chemistry experiments
- Connecting rubber tubing in gas preparation and gas delivery setups
- Joining tubing lines in water, air, or non-pressurised laboratory demonstrations
- Teaching flow direction, branching, and tubing connection methods
- Use with compatible rubber tubing in biology or general science practicals
- Replacement connector for educational laboratory tubing assemblies
How to Use the T-Pattern Connectors 6-7mm
- Confirm that the 6-7mm connector size matches the tubing used in the experiment.
- Inspect the connector for cracks, blockage, deformation, or contamination before use.
- Cut tubing ends cleanly so they fit evenly over the connector arms.
- Push compatible tubing onto each tapered arm without excessive force.
- Use the T-shaped layout to branch or join the tubing according to the practical method.
- Check all joints for loose fit, leakage, or kinks before starting the experiment.
- Run the setup only under approved low-pressure laboratory conditions.
- Disconnect, rinse, dry, and store the connector after use.
Safety note: Use T-Pattern Connectors 6-7mm only with compatible tubing, chemicals, temperature, and pressure conditions. Do not use damaged connectors, blocked tubing, pressurised gas systems, hot gases, toxic gases, or incompatible solvents unless the final specification confirms suitability.
Care & Maintenance
- Rinse the connector after use to remove chemical or biological residue.
- Check all three arms for blockage before reuse.
- Store away from heat, direct sunlight, sharp objects, and aggressive chemical vapours.
- Remove cracked, warped, blocked, brittle, or chemically damaged connectors from service.
Why Choose School Equipments India
School Equipments India manufactures and exports scientific laboratory instruments, laboratory glassware, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. The brand supplies equipment for schools, colleges, universities, research laboratories, and educational procurement projects. Its range supports chemistry, physics, biology, mathematics, general lab equipment, labware accessories, and complete school laboratory setup requirements. Buyers can request final specifications before ordering to confirm connector size, material, pack quantity, and laboratory compatibility.
Frequently Asked Questions
What are T-Pattern Connectors 6-7mm used for?
T-Pattern Connectors 6-7mm are used to branch or join compatible laboratory tubing in a three-way T arrangement.
What material are these T-pattern connectors made from?
The closest verified School Equipments India T-pattern connector listing confirms polypropylene construction. Confirm the material for the exact 6-7mm variant before publishing.
What does 6-7mm mean in this product name?
The 6-7mm size should be confirmed before ordering because it may refer to tubing bore, connector outer diameter, or tubing fit range.
Can these connectors be used with rubber tubing?
Yes, the related T-pattern connector listing confirms riffled ends for rubber tubing. Confirm tubing compatibility for the exact 6-7mm variant.
Are the connectors autoclavable?
The related School Equipments India T-pattern connector listing states autoclavability at 121°C. Confirm this for the 6-7mm variant before sterilization.
Are they suitable for school laboratories?
Yes. They are suitable for supervised school and college laboratories where compatible tubing connections are required for practical science work.
For related laboratory products, explore T-Pattern Connectors, laboratory labware, gas preparation and analysis equipment, and the School Equipments India product catalogue for institutional enquiries.
