Combustion/Ignition Tube Manufacturer,Supplier and Exporter in India
Product Code : EL-GPA-11615
The Combustion/Ignition Tube is a borosilicate glass chemistry tube used for the reduction of metal oxides with hydrogen in gas preparation experiments. It is suitable for schools, colleges, chemistry laboratories, science teachers, laboratory suppliers, distributors, and educational procurement buyers requiring curriculum-linked gas preparation apparatus.
Product Description
The Combustion/Ignition Tube from School Equipments India is listed under Chemistry / Gas Preparation & Analysis with Product Code EL-GPA-11615. The tube is made of borosilicate glass and has a confirmed length of 150 mm and diameter of 25 mm.
This tube has a small hole in the side of the lower end, allowing gas to escape during the practical setup. It is designed for classroom demonstrations involving hydrogen and metal oxide reduction, where students observe gas preparation, gas flow, reaction control, and safe handling of heated chemistry glassware.
Key Features
- Borosilicate glass construction: confirmed material for chemistry laboratory use.
- 150 mm length: verified tube length for standard gas preparation demonstrations.
- 25 mm diameter: confirmed diameter for the listed Combustion/Ignition Tube.
- Side gas-release hole: small hole near the lower end allows gas to escape.
- Metal oxide reduction use: listed for reduction of metal oxides with hydrogen.
- Curriculum-linked product: connected to gas preparation practical work.
- Capacity not applicable: this is a reaction tube, not a measuring or storage vessel.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
Combustion/Ignition Tube |
|
Primary Keyword |
Combustion/Ignition Tube |
|
Secondary / Semantic Keywords |
combustion tube, ignition tube, borosilicate ignition tube, gas preparation tube, metal oxide reduction tube, hydrogen reduction apparatus, school chemistry glassware, chemistry gas preparation equipment |
|
Brand |
School Equipments India |
|
Product Category |
Chemistry / Gas Preparation & Analysis / Combustion and Ignition Glassware |
|
Intended Users |
Schools, colleges, chemistry teachers, science laboratories, laboratory suppliers, distributors, and educational procurement buyers |
|
Capacity |
Not applicable |
|
Length |
150 mm |
|
Diameter |
25 mm |
|
Material |
Borosilicate glass |
|
Product Type |
Combustion / Ignition Tube |
|
Curriculum Link |
Gas Preparation |
|
Application |
Reduction of metal oxides with hydrogen |
|
Special Feature |
Small side hole near lower end for gas escape |
What's Included in the Kit
- Combustion/Ignition Tube, 150 mm x 25 mm
- Instruction sheet, support stand, delivery tube, burner, chemicals, or certificate
Applications / Uses
- Reduction of metal oxides with hydrogen
- Gas preparation and gas flow demonstrations
- School and college chemistry practicals
- Teaching combustion, ignition, and reduction concepts
- Demonstrating the need for gas escape in heated tube setups
- Replacement glassware for compatible gas preparation apparatus
How to Use the Combustion/Ignition Tube
- Confirm the approved experiment method before using hydrogen or any metal oxide.
- Inspect the tube for cracks, chips, blocked holes, or glass damage.
- Set up the tube only with compatible clamps, stands, and gas delivery apparatus.
- Ensure the small side hole is clear so gas can escape safely.
- Add the required reactant only as directed by the supervised practical method.
- Pass hydrogen through the apparatus only after checking all connections.
- Heat the tube gently and evenly according to the teacher-approved procedure.
- Allow the glass to cool fully before dismantling, cleaning, or storage.
Safety note: Hydrogen is flammable. Use this tube only under trained supervision, with goggles, gloves, lab coat, suitable ventilation, and approved low-risk classroom quantities. Never block the gas escape hole or heat damaged glassware.
Care & Maintenance
- Clean the tube after use only after it has cooled completely.
- Keep the side hole free from residue and blockage.
- Store the tube in padded or separated glassware storage to reduce breakage.
- Remove cracked, chipped, blocked, or heat-stressed tubes from service.
Why Choose School Equipments India
School Equipments India manufactures and exports scientific laboratory instruments, laboratory glassware, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. The brand supplies equipment for schools, colleges, universities, research laboratories, and educational procurement projects. Its range supports chemistry, physics, biology, mathematics, general lab equipment, and complete school laboratory setup requirements. Buyers can request final specifications before ordering to confirm pack quantity, accessories, and classroom suitability.
Frequently Asked Questions
What is a Combustion/Ignition Tube used for?
A Combustion/Ignition Tube is used for the reduction of metal oxides with hydrogen in gas preparation and chemistry demonstrations.
What material is the tube made from?
The School Equipments India listing confirms borosilicate glass as the material.
What is the size of this ignition tube?
The confirmed size is 150 mm length and 25 mm diameter.
Why does the tube have a small side hole?
The small hole near the lower end allows gas to escape during the experiment setup.
Is the tube suitable for school laboratories?
Yes. It is suitable for supervised school and college chemistry laboratories teaching gas preparation and reduction reactions.
Can it be heated directly?
It is used in heating-based demonstrations, but heating method, flame source, support setup, and safety limits must follow the approved laboratory procedure.
For related laboratory products, explore gas preparation and analysis equipment, chemical analysis equipment, laboratory labware, and the School Equipments India product catalogue for institutional enquiries.
.png)
.jpg)
