Scientific Boss Head Holder Manufacturer,Supplier and Exporter in India

Product Code : SCL-T-12597

The Scientific Boss Head Holder is a laboratory clamp connector used for holding support rods, clamps, rings, and apparatus at right angles during science experiments. It is suitable for school chemistry labs, physics labs, college laboratories, laboratory technicians, preparation rooms, distributors, and institutional procurement buyers.

Product Description

Scientific Boss Head Holder from School Equipments India is aligned with verified official listings for Heavy Duty Boss Head, Square Boss Head, Square Boss Head Clamp, and Economy Boss Head. These products are used to connect rods and support apparatus securely in laboratory setups.

The verified Heavy Duty Boss Head listing specifies powder-coated alloy construction, adjustable screw, thicker 7 mm threaded clamping screws, and 90-degree rod holding. The Square Boss Head Clamp listing confirms die-cast alloy construction, metal clamping screws, accommodation for square and round rods up to 16 mm, and dimensions of 5.5 × 5.5 × 5 cm.

Key Features

• Right-angle support: holds rods orthogonally at 90 degrees for laboratory clamp setups.
• Up to 16 mm rod compatibility: verified on Square Boss Head Clamp and Economy Boss Head listings.
• Heavy-duty option: Heavy Duty Boss Head listing confirms powder-coated alloy construction.
• Adjustable screw design: supports controlled tightening on compatible rods and apparatus.
• Metal clamping screws: verified on Square Boss Head Clamp for secure rod fastening.
• Compact support component: useful in tight setups where rods, clamps, rings, and apparatus must be connected.
• School lab utility: suitable for chemistry, physics, biology, and general science support-stand arrangements.

Technical Specifications

What's Included in the Kit

• 1 × Scientific Boss Head Holder / Boss Head Clamp
• Integrated adjustable clamping screws
• Support rod, retort stand, ring clamp, burette clamp, tripod, and laboratory stand accessories

Applications / Uses

• Connecting two laboratory rods at right angles
• Holding clamps, rings, and apparatus on a retort stand
• Supporting burettes, condensers, thermometers, funnels, and small apparatus setups
• Creating stable support arrangements for chemistry and physics experiments
• Holding flat articles such as rulers, magnets, or drawing boards where the clamp model permits
• Supporting tender-based procurement for laboratory clamps, stands, and support accessories

How to Use the Scientific Boss Head Holder

1. Inspect the boss head for cracks, loose screws, worn threads, damaged coating, or bent clamping faces.
2. Check that the support rod diameter is within the verified capacity of the selected model.
3. Slide one opening of the boss head onto the vertical support rod.
4. Tighten the screw enough to hold the boss head securely without damaging the rod.
5. Insert the horizontal rod, clamp stem, ring, or apparatus support into the second opening.
6. Adjust the position and angle before final tightening.
7. Check that the mounted apparatus is balanced and not overloading the stand.
8. Recheck tightness during practicals if vibration, heating, or movement is involved.

Safety note: Do not overload the boss head or use it with unstable stands, oversized rods, cracked clamps, or heavy glassware without proper secondary support. Tighten securely before heating, titration, or suspended-apparatus work.

Care & Maintenance

• Wipe chemical residue from the body and screws after practical use.
• Keep screw threads clean and free from rust, grit, and chemical deposits.
• Do not force oversized rods into the clamp openings.
• Store dry with support-stand accessories to prevent loss and thread damage.

Why Choose School Equipments India

School Equipments India manufactures and exports scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. Its Labware category includes boss heads, clamps, rings, burners, bench mats, tripods, tongs, and other practical laboratory support tools. The verified boss-head listings confirm right-angle rod holding, alloy construction, screw-based adjustment, and compatibility with rods up to 16 mm on related models.

Frequently Asked Questions

What is a Scientific Boss Head Holder used for?

A Scientific Boss Head Holder is used to connect rods, clamps, rings, and laboratory apparatus to a retort stand or support rod at right angles.

What rod size does the boss head accept?

Related verified School Equipments India listings state rod compatibility up to 16 mm. The Heavy Duty Boss Head page also mentions 15 mm, so final rod capacity should be confirmed for the selected model.

What material is the boss head made from?

The Heavy Duty Boss Head listing states high-strength powder-coated alloy. The Square Boss Head Clamp listing states die-cast alloy with metal clamping screws.

Can it hold rods at 90 degrees?

Yes. The verified listings state that boss heads hold rods orthogonally, or at right angles, to one another.

Is it suitable for school laboratories?

Yes. It is suitable for supervised school and college laboratories when teachers control support-stand stability, clamp tightening, apparatus load, and experiment safety.

Does it include a retort stand?

No retort stand inclusion is confirmed. Support rods, stands, rings, clamps, and additional apparatus should be listed only if supplied in the final kit.

For related procurement, explore Heavy Duty Boss Head, Square Boss Head Clamp, Economy Boss Head, and Labware from School Equipments India.