Burette Clamp Stand Manufacturer,Supplier and Exporter in India

Product Code : SCL-T-12600

The Burette Clamp Stand is a single-burette laboratory stand used to hold a burette upright during titration, volumetric analysis, and controlled reagent delivery. It is suitable for school chemistry labs, college laboratories, science teachers, laboratory technicians, distributors, and institutional procurement buyers.

Product Description

Burette Clamp Stand from School Equipments India is based on the verified official listing for Burette Stand. The listed product includes a solid wooden clamp, cork lining, and plastic screws for holding a single burette during classroom and laboratory titration work.

The verified model has a 200 mm × 110 mm base, 490 mm height, vernier surface, and four rubber feet for stability. It is designed to support burette positioning during acid-base titration, volumetric analysis, and other supervised chemistry practicals where the burette must remain vertical and readable.

Key Features

• Single-burette holder type: designed to hold one burette securely during titration work.
• 490 mm verified height: supports practical burette positioning above a receiving flask or beaker.
• Solid wooden clamp: verified clamp construction for routine school laboratory use.
• Cork-lined grip: helps hold the burette more safely and reduces direct hard contact with glass.
• Plastic screws: allow controlled tightening without metal-to-glass contact.
• Vernier surface: supports practical alignment and reading during laboratory demonstrations.
• Rubber feet: four rubber feet improve bench stability during titration procedures.

Technical Specifications

What's Included in the Kit

• 1 × Burette Clamp Stand / Burette Stand
• 1 × solid wooden cork-lined clamp
• Integrated plastic screws
• Stable base with four rubber feet
• Burette, funnel, receiving flask, titration reagents, certificate, and datasheet are not included unless confirmed in the final quotation.

Applications / Uses

• Holding one burette upright during acid-base titration
• Supporting volumetric analysis in chemistry practicals
• Helping students read burette graduations at eye level
• Keeping the burette stable while titrant is delivered into a flask
• Supporting teacher demonstrations of end-point detection and titre calculation
• Supporting tender-based procurement for school chemistry laboratory apparatus

How to Use the Burette Clamp Stand

1. Place the stand on a clean, level laboratory bench.
2. Check that the rubber feet are stable and the base is not rocking.
3. Open the wooden clamp using the plastic screws.
4. Insert the burette vertically into the cork-lined clamp.
5. Tighten the plastic screws gently until the burette is secure.
6. Position the receiving flask or beaker below the burette tip.
7. Check that the burette scale is visible and vertical before filling.
8. After titration, loosen the clamp carefully and remove the burette for cleaning.

Safety note: Do not overtighten the clamp on glass burettes. Wear PPE when using acids, alkalis, oxidising agents, or other titration reagents, and keep the stand stable throughout the practical.

Care & Maintenance

• Wipe spills from the base, clamp, cork lining, and plastic screws after use.
• Keep the wooden clamp dry to prevent swelling, staining, or loosening.
• Check rubber feet regularly and replace the stand if stability is reduced.
• Store the stand upright in a dry laboratory cabinet or preparation-room rack.

Why Choose School Equipments India

School Equipments India manufactures and exports scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. Its Burettes & Pipettes category supports volumetric-analysis requirements for schools, colleges, laboratories, distributors, and institutional buyers. The verified Burette Stand listing confirms product code EL-BP-11482, single-burette holder type, solid wooden cork-lined clamp, plastic screws, vernier surface, 200 mm × 110 mm base, 490 mm height, and four rubber feet for stability.

Frequently Asked Questions

What is a Burette Clamp Stand used for?

A Burette Clamp Stand is used to hold a burette upright during titration and volumetric analysis. It keeps the burette stable while liquid reagent is delivered into a receiving flask.

How many burettes does this stand hold?

The verified School Equipments India listing specifies a single-burette holder type.

What are the dimensions of the stand?

The official listing specifies a 200 mm × 110 mm base and 490 mm height.

What type of clamp does it include?

The verified listing states that it includes a solid wooden clamp, cork-lined and fitted with plastic screws.

Does the stand have a stable base?

Yes. The official listing states that the base is fitted with four rubber feet for stability.

Is it suitable for school chemistry labs?

Yes. It is suitable for supervised school and college chemistry laboratories when teachers control burette mounting, reagent handling, titration setup, glassware safety, and PPE use.

For related procurement, explore Burette Stand, Burettes & Pipettes, Metal Burette Clamp - Double, and Plastic Burette Clamp from School Equipments India.