Heavy Duty Retort Stand Manufacturer,Supplier and Exporter in India

Product Code : SCL-T-12603

The Heavy Duty Retort Stand is a laboratory support stand used for holding clamps, boss heads, rings, burettes, thermometers, funnels, and small apparatus during supervised science experiments. It is suitable for school chemistry labs, physics labs, biology labs, preparation rooms, laboratory technicians, distributors, and institutional procurement buyers.

Product Description

Heavy Duty Retort Stand from School Equipments India is prepared for the laboratory support-stand category. A direct verified standalone page for this exact product name was not found, so the content uses only verified retort-stand and support-component evidence from the School Equipments India website.

Verified related products include a retort stand supplied with the Digital Hotplate and Magnetic Stirrer, and a Steel Retort Ring with Boss Head Clamp. The official Steel Retort Ring listing confirms a plated mild-steel stem, integrated boss head clamp, metal thumb screw, and rod acceptance from 0.8 cm to 1.5 cm diameter. Final retort-stand base size, rod height, rod diameter, base material, and load capacity should be confirmed from the final quotation or datasheet.

Key Features

• Laboratory support function: holds rods, clamps, rings, burettes, funnels, thermometers, and apparatus setups.
• Retort stand category fit: suitable for chemistry, physics, biology, and general science practical work.
• Verified related rod height: one official equipment listing includes a 320 mm retort stand height.
• Compatible support accessories: works with boss heads, ring clamps, extension clamps, and laboratory holders when sizes match.
• Useful for titration and heating setups: supports mounted glassware and apparatus under supervision.
• Procurement-safe specification: unknown stand dimensions and load details are marked for confirmation.
• School lab utility: supports repeatable apparatus arrangement on science laboratory benches.

Technical Specifications

What's Included in the Kit

• 1 × Heavy Duty Retort Stand base 
• 1 × vertical support rod
• Boss head, ring clamp, burette clamp, extension clamp, tripod, burner, glassware, certificate, and datasheet

Applications / Uses

• Holding burettes during titration and volumetric-analysis practicals
• Supporting funnels during filtration demonstrations
• Mounting thermometers, probes, and small apparatus at a fixed height
• Holding ring clamps for supported heating with compatible glassware
• Creating physics support setups for pendulums, springs, magnets, rods, and measurement tasks
• Supporting tender-based procurement for school laboratory support apparatus

How to Use the Heavy Duty Retort Stand

1. Place the retort stand base on a clean, level, stable laboratory bench.
2. Check that the vertical rod is tightly fixed to the base.
3. Select a compatible boss head, clamp, ring, or holder for the required apparatus.
4. Mount the accessory on the rod and tighten the screw gradually.
5. Position the apparatus at the required height and angle.
6. Check that the total load is balanced over the base before adding liquids or heating.
7. Keep glassware centred and avoid side-heavy arrangements that may tip the stand.
8. After use, remove apparatus first, then loosen clamps and store accessories safely.

Safety note: Do not overload the stand. Use secondary support for heavy glassware, heated vessels, tall assemblies, or suspended apparatus. Keep burners and hot glassware away from unstable clamp positions.

Care & Maintenance

• Wipe chemical spills from the base, rod, and clamp contact points after each use.
• Keep screw threads, boss heads, and rod surfaces clean for secure tightening.
• Remove bent rods, cracked bases, loose fittings, or unstable stands from service.
• Store dry with clamps and boss heads to reduce corrosion, loss, and thread damage.

Why Choose School Equipments India

School Equipments India manufactures and exports scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. Its Labware category includes boss heads, support clamps, rings, tongs, burners, bench mats, and other practical laboratory accessories. The verified Steel Retort Ring with Boss Head Clamp and boss-head listings confirm School Equipments India’s support-apparatus range for classroom laboratory setups.

Frequently Asked Questions

What is a Heavy Duty Retort Stand used for?

A Heavy Duty Retort Stand is used to support clamps, rings, boss heads, burettes, funnels, thermometers, and small apparatus during supervised laboratory experiments.

What is the verified height of the retort stand?

A 320 mm retort stand height is verified only for the retort stand supplied with the Digital Hotplate and Magnetic Stirrer. The standalone Heavy Duty Retort Stand height should be confirmed before publishing or ordering.

Does the stand include a boss head or clamp?

No boss head or clamp inclusion is verified for the standalone Heavy Duty Retort Stand. These accessories should be listed only if included in the final quotation.

Can it be used for titration?

Yes, a retort stand can support titration setups when fitted with a compatible burette clamp or boss head and placed on a stable bench.

Can it support heating experiments?

Yes, it can support compatible ring clamps and apparatus during supervised heating setups, provided the load is stable and the setup follows laboratory safety procedures.

Is it suitable for school laboratories?

Yes. It is suitable for supervised school and college laboratories when teachers control clamp selection, load balance, stand stability, glassware condition, and heating safety.

For related procurement, explore Labware, Heavy Duty Boss Head, Steel Retort Ring with Boss Head Clamp, and Clamp - Three Finger Vinyl Coated from School Equipments India.